Відео

Are you an outside the box kinda guy aren’t you hard to find and very intelligent

Make the connection. Magnets bend Space-Time in a small “area”. It’s not hard to do as all matter does this to varying degrees. Matter-Energy. It’s just hard for us to step away from our comfy assumptions and see it!

Very cool channel. I think my wife had a cousin in Grants Pass; I know her Uncle John Tompkins used to own a dairy or something like that in Grants Pass; it's his daughter that I am talking about. My wife passed so I can't ask. I look forward to watching everything you’ve posted.

Stick one for each freqency on your GolBugPro.. circuit enclosure

that's pretty cool

I understand even less about electricity every single day

Could it manage to pickup channel 62? I keep missing my favorite shows like Underwater Bowling for Teens and Fun With Dirt because of my cheap antennae

I recently installed a random Long Wire antenna, whose far end was close to the electrical lines that provide electricity to our homes, with the lines in our back yards ! On a whim, I attached a Green L.E.D. across the antenna lead to earth ground, and it does light the L.E.D. ! Moving the end if the wire away from the power lines, stops the lighting, proving in fact the electrical energy being inductively coupled to the wire ! Mind you, these are not extremely high voltage lines, where the induced voltages would be many times higher !

pretyy frikkin' cool

I mean the last one you are just passing a radio signal into the power of the leds, we cant see those modulations in amplitude/frequency as they are being emitted in light form. The solar panel is made to capture light energy and covert it back into an electrical signal, that signal is being input into a receiver that is capable of decoding that signal, and processing it into sound. Radio waves are a type of light wave, sound waves are a mechanical waves and require a medium(air) to work. Another cool concept along the same lines, is turning a lightbulb or window into a microphone using a laser as a covert audio surveillance device.

So LED lights allow anyone with this type of set-up to listen in without a warrant?

There is a potential for improving a non-grounded faraday shield... to sync energy into noninterfering light. so your sensitive stuff lives inside an antenna that robs everything coming in. Patent Pending. ;)

Thank you sir...

You made a pulsar

I have an issue with my Samsung tv, i have the red standby light, when i click the power button on the remote the red light will flash then goes out but i have no picture or sound from the tv. Do you suspect the mainboard ?

very cool ending

That's definitely sub worthy.

If only all videos on here were this effective in getting to the point without fluff. THANK YOU!

Can I get some specs on the audio oscilloscope please 🥺

Wait back up explain it a little slower If you could give some visual cues on paper might help also. Me Not enough smart for variables.😂 I could never figure out why everything just kept catching fire 😳

How long is the antenna needed for a frequency of 27mhz?

Thank you so much for this video it just helped me understand so many things

Galina is dangerous! It has lead in it. You do not want to breathe or ingest Galina.

Your "audio oscilloscope" is a really clever idea. I'm thinking about modifying it so that the indication is a LED which glows more brightly as the signal gets stronger. BTW, I'm the person who designed the Anatek Blue ESR meters...

this was the last thing i needed to know , I'm on my way to jeopardy

Learned something the other day. The reason why the negative end of a diode is marked '+'. On a full wave rectifier the cathodes produce your positive output and the anodes are on the negative output.

Is this how radars work?

Did you connect the led's to a speaker wire from a radio?

Hmmm... suddenly, I think I understand why the garage repair guy told us to never use LED bulbs in our door's motor 🤔 When he said they interfered with the signal from the remote, I guess he wasn't messing around.

Because the LED's are crystals?

Out put ota antenna satellite antenna connection oru video podunka

What light combination do you need to be able to hear aliens communicating? 😅 I liked this demonstration though.

This is perfect for all those times where I'm not sure if something is a remote control or not!

Kambi antenna satellite connection pannuvathu eppadi spitter use oru video podunka

Are you sure the last sounds aren't just the two led bulbs having a conversation?

great scott!! Very useful in the coming apocalypse, now more people will be able to hear radio broadcasts when the internet is gone and GPS satellites collide into one-another! make sure to get telephone enhancers for your grand parents'!

I had a Taz the tasmanian devil McDonald’s toy that had him magnetically levitated. I believe both poles were used, top and bottom

Question, where’s the humming coming from if you are way up in the mountains?

LiFi

brilliant work

"with special thanks to k11 a1 j10 o15 - 11 11 6 for proving the rf- 24 power" loud and clear 74

The magnetic part of the electro-magnetic spectrum, I just built a Magnetic loop antenna that is making digital contacts all over the country at 20 watts from my friends' basement. Good demo sir.

its a shame that more people aren't taught about old school technology in school. I was fascinated when I first learnt that you could have a radio literally running on wireless energy

#1 It all has to do with phasing, if antenna A is out of phase with antenna B you will get what’s called destructive interference. If the two antennas are in phase with one another you will get what’s called Constructive interference. *_“Destructive interference is when two waves traveling in the same direction are aligned at the crest of one wave and the trough of the other. The waves cancel out. Constructive interference is when two waves traveling in the same direction overlap, and their crests combine to produce a larger wave.”_* #2 If two identical antennas are co phased correctly you will get a gain of 3 db however, the length of the cables used for the phasing harness has to be a ¼ wave length for the frequency that you are trying to receive so they will be in phase for that frequency and only for that one frequency, and the antennas need to be spaced a 1/4 wave length from one another again this is for the frequency that you are trying to receive so they will be in phase for that frequency and only for that one frequency. This could contribute to losses at other frequencies. #3 Most signal combiners or antenna combiners, at best have an insertion loss of 3db this 3db loss will mitigate any gain that you would get from combining the two identical antennas. When you combine two antennas you get 3 db of gain. Note: I have used two identical antennas stacked one above the other with a ¼ wave phasing harness made from 300 ohm twin lead cut for the ¼ wave length of frequency that I wanted to receive. The phasing harness was between two antennas that I wanted to co phase I attached the twin lead to the 300 ohm terminals of each of antenna then on the bottom antenna where the twin lead connected to the 300 ohm terminals I attached a 300 to 75 ohm balun so I could run coax cable to the TV’s. It worked very well with very little loss on the other channels. The advantage of using the 300 ohm twin lead is that it eliminates the signal combiners and the 3db of loss that the contribute.

Lovely simple idea , my friend used to use small light torch bulb connected at centre of dipole near Transmitter to tune up amplifier, only works in close proximity though maybe not as sensitive as LED version shown

I used the RCA Yagi in a wooded area with almost all UHF with like 3 Hi VHF got 75 channels with it full signal strength with no amplifier and on a J-pole a foot above roof line

The Mode Switch made me a fortune in my Electronics business.😂

Electronics is witchcraft.😂

15 cents in the Early 80' thrifty then 25,

Do that principal work for dc motor power? To make mini bike from a 63 ranchero heater blower motor?